Category Archives: restoration

The little stove

The plan had been to build a rocket stove this past summer, but plans do always go as we might expect. With all the time and effort going to build the greenhouse in time the rocket stove, Jame’s bedroom and several other ‘planned’ tasks were set aside.

The stove int he little cabin had a destiny to be in the greenhouse but that left us in freezing weather with no heat source and no time to build the rocket stove. After a search and with time running short we found a small wood stove within the range we could afford.

It had been outside for god only knows how many years. It was rusted extensively and cracked out from water freezing inside. It did however have all the parts and a glimmer of hope for it. The stove is over a 100 years old and with fingers crossed James and I loaded it up and paid the old man.

On the deck in pouring rain we took the drill gun and wire brush to it, stripping off decades of rust to get down to the metal. Once clean, about 10 hours of sanding, I used JB weld to seal the cracks. Over the body of the stove I used stove black, high temp paint, and we built a fire.

15218306_1452676881428827_1492189753_n

For anyone who has never done this, do it outside or when you can leave every door and window open. The smell if horrific and highly toxic. It took about 5 hours to burn it clean. Once clean of the stink we moved it in the next down.

This style of stove has several issues I should point out. I bought the stove aware of them as I had grown up with a very similar stove in my bedroom. The stove pipe union is oval and it is very difficult to attach a round union to an oval piece. If you have a short chimney this can be an issue. It needs a chimney damper. These stoves are not designed to work without one, and you have to be very careful how to put your logs in and not burn your hands. 15239136_1459573284072520_1866510889_n

The shape of the stove means you need to stand them up on end, but if you do not have them in there touching they will often simply go out. It is a slightly more maintenance fire place than others but once its hot it stays hot. The amount of cast iron allows it to radiate heat for hours after the fire has died.

There are pieces that yet need to be re-chromed, but once those are seen to the stove will truly have been given a new life.